ClearMirror 2436BL 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} ClearMirror 2436BL에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearMirror 2436BL 6 페이지. Led back-lit and side-lit fog-free vanity mirrors

NOTE: Polarity is not relevant - there are neither positive nor negative connections on the

ClearMirror heater pad, nor are there any ground wires

CAUTION: Ensure leads are not stuck between the mirror and the wall.

CONNECT LEADS TO POWER SUPPLY

To connect the mirror heater and mirror wires:

1. Coming through the opening in the back of the unit, twist one of the black wires marked

"HEATER" to one of the black wires marked "LED" and connect to one of the power supply

wires in your junction box using wire connectors.

2. Do the same for the two remaining wires (twist the other black wire marked "HEATER" to

the other black wire marked "LED" and connect to the remaining power supply wire in your

junction box using wire connectors.

3. Wrap wire connectors and wire with electrical tape and push excess into junction box.

COMPLETE WIRING AND MOUNTING

1. Hang mirror on the double hanger system. Use two people.

2. Turn on the circuit breaker and the switch for mirror power supply.

3. Test ClearLite fog-free heater by placing hand on mirror surface. Area will heat in 3 to 5

minutes. LED lights should turn on.