ESI LIFT 사용 설명서 - 페이지 5

{카테고리_이름} ESI LIFT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI LIFT 7 페이지. Desk-clamp

ASSEMBLY

Attach Main Assembly to Clamp Track

then turned over, positioned on the track, and screwed in place.

Raise Column

• Place your hand on the end of the column to control

the rate of movement.

• Depress the paddle lever. Feather it to further

control the rate of movement.

WARNING: Stand well away from the path of

column movement. The column could raise

quickly and suddenly, potentially causing injury.

Position Base of Column on Clamp Track

The position of the column base varies depending upon work surface depth. See illustrations.

• Turn the main assembly over so that the base is on the bottom.

• Position the base toward the front of the track with deeper work surfaces.

• Position the base toward the rear of the track with shallower work surfaces. Allow at least one set of two

holes to remain exposed at the rear of the track for attachment of the support bracket.

24"

Depth

Attach Base of Column to Clamp Track

• Use four of the M6x8mm screws to attach

the base, as shown.

• Tighten the screws using the 4mm Allen

key.

Depress

Paddle

Lever

30"

Depth

LIFT

M6x8