ABC Office 3905 U 사용 설명서 - 페이지 5
{카테고리_이름} ABC Office 3905 U에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABC Office 3905 U 7 페이지.
페이지 인쇄The scale behind the crank serves fro fine adjustment of the back gauge. The figures "0-9" show
in a enlarged from the mm of the side gauge scale. "0" means a whole cm, "1-9" the
corresponding mm.
The exact adjustment of the size is always don in a way that the back gauge pushes paper toward
the front.
10. Back Gauge
Operation via the crank. For adjustment to the desired cutting size and for exact parallel placing
of the paper plies to be cut.
Do no use the back gauge for straightening the pile, as this will cause the gauge to move away
from the adjusted measurement and be inaccurate.
11. Side Gauge with Scale
In mm/cm and inch. For rectangular placing of the paper pile. The indicator on the back gauge
shows the measurement, which is adjusted on the scale of the side gauge. Fine adjustment is down
via the mm scale of the scale ring (#9).
12. Stand
Made of steel. Standard equipment of Model 3905 U.
Operation
•
The knife lever (#1) is locked in its top position.
•
Bring hand guard (#5) up. Push the paper pile into the machine from the front and place it against
the back gauge (#10) and along the side gauge (#11) on the left.
•
Push the back gauge crank (#9) toward the cutter to engage, and then turn the crank handle (#10)
clockwise to bring the back gauge toward the knife until the paper measurement is reached. With
the help of the fine adjustment ring, accurate measurement can easily be reached.
•
Release the back gauge crank (#9), so that the unintentional movement of the back gauge can be
prevented.
•
Throw the lever of the flick action clamping system (6) from the right to the left. When the flick
action clamping device touches the paper pile, apply quick pressure to the handle and then let go.
The paper pile is now secure.
•
Bring down the hand guard (#5).
•
Release the knife lock (#2) and bring down the knife lever (#1) using both hands. When the cut is
complete, move the knife lever to its top position until it locks.
•
Release the hand lever of the flick action clamp system (#6). Lift the hand guard (#5) upwards
and take the paper out of the cutter.
Regrinding
Please note – A dull knife does not cut accurately. The cutting of heavy paper or cardboard means
sharpening the blade more often keeping a spare knife on hand. Should you be unable to find a
local sharpening service, contact your dealer or distributor.
Cutting Stick
5