1 BY ONE Shinny White Series 매뉴얼 - 페이지 2

{카테고리_이름} 1 BY ONE Shinny White Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 1 BY ONE Shinny White Series 2 페이지. Paper thin digital indoor hdtv antenna - 35 miles range
1 BY ONE Shinny White Series에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)

페이지 인쇄

1. Connect the Antenna on the back of Your TV

Connect the 16ft. coaxial cable to the ANT/IN or CABLE IN port on the back of your

TV. Note: For TV's that require a tuner box, connect the coaxial cable to the tuner box

ANT/IN or CABLE IN port.

From 16ft.

Coaxial Cable

See the "Final Con guration" Illustrations below for

both connection options-

When connected to HDTV with built in digital tuner

Digital

Antenna

When connected to TV through digital tuner converter box

Digital

Antenna

Digital Converter Box

Back of TV

ANT/IN

CABLE IN

HDTV

Traditional TV

里面

2. Mount Antenna

Find a convenient indoor location to mount your antenna then, set up the channels in the following,

"Scan For Channels" step below.

Note: Test your antenna location after scanning for channels & before nal mounting with the 3M

mounting stickers. In some instances, you may decide to relocate the antenna for better reception.

See "Antenna Placement Options and Tips" below.

If you do not want to mount the antenna to the wall or to a window, you can use the 1byone®

accessory antenna stand Model #O0000-0366 for convenient desk or tabletop placement.

Note: Antenna stand is sold separately. www.1byone.com

3. Scan for Channels

A. In the TV's setup menu, set the mode to Antenna or Air. Refer to the TV manual for detailed

instructions.

B. While in the TV's setup menu, set TV to scan for channels. This can sometimes be listed as

auto-program, channel search or channel scan. Consult your TV manual for detailed instructions.

Antenna Placement Options and Tips

TV reception and quality depends on the distance from the transmitting tower to your home.

Surrounding environments may also a ect signal strength and reception.

If your reception is sporadic or needs to be improved, try the helpful tips below,

1. Placing the antenna in a higher location may result in better reception.

2. Placing the antenna facing the broadcast tower may result in better reception.

3. Placing the antenna close to or on a window may also result in better reception.

Important: Always re-scan for channels whenever you move your antenna.

Frequently Asked Questions

How many channels can I receive?

The number of channels you can receive will be determined by what is being broadcast in your area.

Channel reception will vary from location to location based on terrain (including trees, buildings,

hills and mountains). The fewer obstructions, the better your chance of receiving strong digital

signals. Go to http://dtv.gov/maps. Enter your address for a listing of likely channels available in

your area.

Do I need to use an External Ampli er?

The ampli er can enhance signals weakened by obstructions between you and the broadcast towers.

If your TV picture is not crystal clear, or you are unable get strong signals from distant towers, you

can use the ampli er to boost the weakened signals.

Note: We do NOT recommend using the ampli er if your house is very close to the broadcast tower

and the signal is already very strong. A booster will cause self-oscillation and you may actually end

up getting fewer signals than without it.

Will all the channels I receive be High De nition (HD)?

Not all digital signals are High De nition (HD). Make sure you are using a High De nition Television

(HDTV) with built in ATSC tuner. When connecting the antenna to a third-party receiver, make sure it

is capable of receiving HD. Otherwise no HD channels can be picked up.