ACOUSTIC SOLUTIONS SP110 매뉴얼 - 페이지 15

{카테고리_이름} ACOUSTIC SOLUTIONS SP110에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACOUSTIC SOLUTIONS SP110 18 페이지. Hi-fi separates dab tuner

TROUBLE SHOOTING

I cant get any sound from my SP110

Display says 'no services available'

I can't access secondary services

Display has gone blank or says 'service off air'

I can't hear the station I have selected

I hear a burbling sound on some stations

Problem

Possible cause

Connection leads to amplifier not made correctly.

Speakers not connected to amplifier.

Power of SP110 or connected amplifier not turned on.

Ensure that the SP110 has been able to locate DAB stations

Check that antenna is connected.

Ensure that DAB coverage exists in your area.

At the time of publishing this manual not many secondary services are

available, this will increase as more DAB stations start broadcasting.

If a secondary service station is available, the secondary indicator >> will

be displayed next to the station name.

This may occur if a broadcaster changes the label of a service or removes

a label whilst you are listening to it. The SP110 will try to retune to this

station, or alternatively follow the procedure for auto tune on page 11.

Ensure you have pressed the function control knob when you have made

your selection. The station you are currently listening to will be displayed

on line 1 of the LCD display, as you scroll through the station order list

line 2 will show other station options. Press the function control knob to

activate your choice.

DAB like other digital media is good at producing quality audio from a

low level signal, however if this signal level is too low

a 'burbling' sound can sometimes be heard. To reduce this try

repositioning your antenna to gain maximum signal strength, alternatively

you may wish to purchase an antenna booster to enhance the level

available to the SP110.