dixell COOL MATE XLH360 사용 설명서 - 페이지 6

{카테고리_이름} dixell COOL MATE XLH360에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dixell COOL MATE XLH360 16 페이지. Cool mate temperature and humidity controller for seasoning-maturing cabinets

페이지 인쇄

dIXEL

Push twice the corespondent key: the setting value of the current phase (dripping or running) will be displayed.

Modify it using the UP and DOWN keys

Confirm the value using the corespondent key: temperature (SET TEMP), humidity (SET %RH) or remaining time (CLOCK).

NOTE: the changes made will be memorised. So the next cycle will start with the new values.

8. THE DISPLAY

To display and modify target temperature set point. (SET TEMP) for the running (St1)and

the dripping (StG) phase.

To display and modify target humidity set point (SET %RH) of the running (SH1) phase; in

programming mode it selects a parameter or confirm an operation.

In programming mode it browses the parameter codes or increases the displayed value.

If oA2=ESt hold it pressed for 3s to start a extraction cycle

To start a manual defrost: hold it pressed for at least 3s.

In programming mode it browses the parameter codes or decreases the displayed value.

Switch ON and OFF the light, if present (oA1=lig)

Start: to start the cycle

Clock: to set the duration of the dripping (dri), running (on) and stopping (off) phases

Switch ON and OFF the instrument.

KEY COMBINATIONS

To lock and unlock the keyboard

To enter the programming mode.

To exit the programming mode.

8.1 ICONS AND SYMBOLS

Each LED function is described in the following table.

1592017410 XLH360 GB r1.0 15.04.2005.doc

Operating Instructions

SET

XLH360

cod. 1592017410

%RH

6/16