ESI nEar08 classic 사용자 설명서 - 페이지 7

{카테고리_이름} ESI nEar08 classic에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI nEar08 classic 10 페이지. Professional 8” studio reference monitors

ESI

Rear Panel

1. XLR input – this connector accepts balanced XLR input connections. The XLR input is wired

like this:

2. TRS input – this jack accepts TRS input connections, either balanced or unbalanced. For

balanced connections, a 3-conductor TRS plug is necessary. The TRS input is wired like this:

Unbalanced wiring works with either a 2- or 3-conductor TRS connector. A 2-conductor TRS plug

(or sometimes also just called TS plug) automatically grounds the minus signal input, whereas a 3-

conductor TRS plug wired unbalanced provides the option of leaving the minus open or grounded.

We recommend that you ground the unused input.

3. serial number – this label contains the product serial number.

4. vent port –nEar08 classic is a vented box speaker system with a vent port on the rear panel.

Make sure you are not blocking the vent port (i.e. by putting the speaker too close to a wall) or the

sound colour will be changed.

INPUT SIGNAL

Shield

INPUT SIGNAL

Shield

XLR CONNECTIONS

PIN 2

PIN 3

PIN 1

TRS CONNECTIONS

Tip

Ring

Sleeve

nEar08 classic