ESI SW10K eXperience 사용자 설명서 - 페이지 10

{카테고리_이름} ESI SW10K eXperience에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI SW10K eXperience 13 페이지. Professional reference sub-woofer monitor
ESI SW10K eXperience에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지)

페이지 인쇄

- Type: Powered Subwoofer

-Subwoofer Driver: 10" black paper cone with high temperature voice coil and damped

rubber surround.

- Frequency Response: 30Hz - 180Hz, Adjustable 50Hz – 180Hz

- Amplifier Power: 100W@100Hz, 4 ohm, 0.1% THD

- Dynamic Power: 120W

- S/N Ratio: >100dB below full output

- Input Connectors: 2 x XLR R/L Balanced Input Connector

-Output Connectors: 2x XLR Balanced output for Satellites

- Controls : Level, Phase, Subwoofer Frequency, Satellite Frequency

- Switches : Power On/Off slide switch,

L&R XLR Outputs "HPF Bypass" On/Off Slide Switch.

- Input Impedance: 20K ohms balanced, 10K ohms unbalanced

- Input Sensitivity: 150 mV input produces full output with Input Sensitivity control at

maximum.

-Protection: over temperature, shorting, an external main fuses.

- Indicators: Power ON (Red)/ Protection (Red) /Operation(Green)

- Power Requirements: Factory programmed for either 115V ~50/60Hz,

- Cabinet: vinyl laminated MDF

- Dimension (unit): 384mm(H) x 354mm(W) x 384mm(D)

- Dimension (Shipping Carton): 492mm(H) x 488mm(W) x 458mm(D)

- Net Weight: 12.5 Kg (27.5 lbs) /unit (without packing)

- Shipping Weight: 16.5 Kg (36 lbs) /unit (with shipping carton)

Remarks: Above specifications are subject to change without notice.

Technical Specifications

2 x TRS Balanced/ Unbalanced Input Connector

1x XLR Balanced output for Extra Sub

230V~50/60Hz or 100V~50/60Hz;

Power via detachable 3 circuit line cord.