ClearOne AccuMic PC 사용자 설명서 - 페이지 12
{카테고리_이름} ClearOne AccuMic PC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne AccuMic PC 20 페이지. Clearone communications microphone user manual
페이지 인쇄AccuMic Microphone — AccuMic VC
AccuMic VC
Connecting the AccuMic VC
The AccuMic VC easily connects to most video codecs at the line level audio input and
output. Please refer to the table in the appendix for a list of video codecs that are
compatible. You can connect an optional AccuMic VC Extension Mic (kit part no.
910-156-117) to expand the sound pick-up capabilities of the conferencing system.
To connect to a video codec
1. Connect the 10-pin end of the mini-DIN cable to the 10-pin connector on the AccuMic VC.
2. Connect the Speaker Ref In plug (white) to the video codec's Audio Out jack.
3. Connect the Mic Out plug (red) to the video codec's Audio In jack.
4. Using an RCA audio cable or an adapter (not included), connect the Speaker Ref Out
(white) plug to the television's Audio In jack.
5. Connect the power connector to the power supply and plug the power supply into an outlet.
MIC
(PLUG IN POWER)
1
POWER
100BASE-TX/
DC12V
AUDIO OUT
10BASE-T
(MIXED)
2
Video Codec
To Audio
In
Mic Out
(Red)
AUDIO
VIDEO
ISDN B
ISDN C
AUX2
IN
AUX1
IN
ISDN A
1
2
IR OUT1
IR OUT2
OUT
MONITOR OUT
AUX OUT
To Audio
To Adapter
Out
Speaker Ref Out
(White)
Speaker Ref In
To Power
(White)
Power Connector
(Black)
10-Pin Connecter
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
TV or Video Monitor
To Audio In
AccuMic VC
Figure 15. AccuMic VC connections
9
Power Supply