Alto-Shaam HALO HEAT 750-GDU/PT 설치 운영 및 유지보수 - 페이지 3
{카테고리_이름} Alto-Shaam HALO HEAT 750-GDU/PT에 대한 설치 운영 및 유지보수을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto-Shaam HALO HEAT 750-GDU/PT 19 페이지. Lighted display cabinets, hot food
Alto-Shaam HALO HEAT 750-GDU/PT에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 작동 및 관리 매뉴얼 (16 페이지)
페이지 인쇄
SAFETY PROCEDURES
A N D P R E C A U T I O N S
Knowledge of proper procedures is essential to the
safe operation of electrically and/or gas energized
equipment. In accordance with generally accepted
product safety labeling guidelines for potential
hazards, the following signal words and symbols
may be used throughout this manual.
Used to notify personnel of instal-
NOTE:
lation, operation, or maintenance
information that is important but
not hazard related.
Used to indicate the
presence of a hazard that
will cause severe personal
injury, death, or substantial
property damage if the
warning included with this
symbol is ignored.
Used to indicate the
presence of a hazard that
can cause personal injury,
possible death, or major
property damage if the
warning included with
this symbol is ignored.
Used to indicate the
presence of a hazard that
can or will cause minor or
moderate personal injury
or property damage if the
warning included with
this symbol is ignored.
Used to indicate the
presence of a hazard that
can or will cause minor
personal injury, property
damage, or a potential
unsafe practice if the
warning included with this
symbol is ignored.
# 8 2 8 O p e r a t i o n a n d C a r e M a n u a l • 2.
1. This appliance is intended to cook, hold or
process foods for the purpose of human
consumption. No other use for this appliance
is authorized or recommended.
2. This appliance is intended for use in
commercial establishments where all
operators are familiar with the purpose,
limitations, and associated hazards of this
appliance. Operating instructions and
warnings must be read and understood
by all operators and users.
3. Any troubleshooting guides, component
views, and parts lists included in this
manual are for general reference only
and are intended for use by qualified
technical personnel.
4. This manual should be considered a
permanent part of this appliance. This
manual and all supplied instructions,
diagrams, schematics, parts lists, notices,
and labels must remain with the
appliance if the item is sold or moved to
another location.