Akiyama CDX-MP200S 사용 설명서 - 페이지 4

{카테고리_이름} Akiyama CDX-MP200S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akiyama CDX-MP200S 16 페이지. Professional cd player

PART NAMES AND FUNCTIONS

Allow for sufficient heat dispersion when installed on a rack.
h
Handle the power cord carefully.
h
Hold the plug when unplugging the cord.
h
Keep the appliance free from moisture, water, and dust.
h
Unplug the power cord when not using the appliance for long
h
periods of time.
10 seconds of anti-shock memory
h
Instant start
h
Seamless loop
h
Pitch range : +/-100% +/-0.1% (+/-16% for Mp3)
h
4 hot cues for Sampler and Cue memmory, <5sec.
h
Auto cue function (-48 dB)
h
500 *4 sampler (cues) can be memorized
h
Selectable elapsed, remain and total remain time display
h
1.Checking the Contents
Check that the carton contains the following items:
1. Main unit
2. Operating instructions
3.ARCApin cord.
4.A AC power cord.
2. Installing the Unit
1. Place your unit on a flat surface.
2. Be sure the player is mounted in a well ventilated area where it
will not be exposed to direct sunlight, high temperatures, or high
3. Connections
1) Turn off the POWER switch.
2) Connect the RCApin cord to the input on your mixer.
CAUTION:
1. Precautions on handling compact discs.
- Do not allow fingerprints, oil or dust to get on the surface of the disc.
- If the disc is dirty, wipe it off with a soft dry cloth.
- Do not use benzene, thinner, water, record spray, electrostatic-proof
chemicals, or silicone-treated cloths to clean discs.
- Always handle discs carefully to prevent damaging the surface; in
particular when removing a disc from its case or returning it.
- Do not bend the disc.
- Do not apply heat.
- Do not enlarge the hole in the center of the disc.
- Do not write on the label (printed side) with a hard-tipped implement
2
NOTE ON USAGE
h
h
h
h
FEATURES
h
h
h
h
h
h
h
PREPARATIONS
3. Try to place the unit as far as possible from TVs and tuners, as the
CAUTION:
The player will work normally when the main unit is mounted with
the front panel at within 15 degrees of the vertical plane. If the unit is
tilted excessively, discs may not be loaded or unloaded properly.
The unit panel's LCD's is designed to be clearly visible with in the
angles shown in Figure 1. Mount the unit panel so that the visual
angle is within this range.
- Be sure to use the supplied cables. Using other types of cable may
result in unit damage.
- To avoid sever damage to the unit, be sure the power is off when
connections to the unit.

HANDLING COMPACT DISCS

Do not obstruct the ventilation holes. (For units with ventilation
holes)
Do not drop foreign objects into the unit.
Do not let insecticides, benzene, and thinner come in contact with
the set.
Never disassemble or modify the set in any way.
Single/continuous play
Relay play allows consecutive playback during two decks
S/PDIF digital audio RCAcoaxial
LCD display
Music Master Tempo
Mp3 Playback
Scratch Effect
humidity.
unit may cause undesirable interference.
such as a pencil or ball point pen.
- Condensation will form if a disc is brought into a warm area from a colder
one, such as outdoors in winter. Do not attempt to dry the disc with a hair
dryer, etc..
2.Precaution on storage
- After playing a disc, always unload it from the player.
- Always store the disc in the jewel case to protect from dirt or damage.
- Do not place discs in the following areas:
- Areas exposed to directs sunlight for a considerable time.
-Areas subject to accumulation of dust or high humidity.
-Areas are affected by heat from indoor heaters, etc..