ClearOne BMA CT 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} ClearOne BMA CT에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne BMA CT 17 페이지. Beamforming mic array - ceiling tile
ClearOne BMA CT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지), 설치 매뉴얼 (2 페이지)

페이지 인쇄

BMA CT

CONNECTING THE BMA CT UNITS

Connect the BMA CT units to the CP2 unit via P-Link connections using

CAT6-23AWG solid conductor RJ45 cables.

i/o c

onnectionS

Speakers out

• You must power the BMA CT with an external IEEE 802.3at PoE+

source that provides 56V and 640 mA (36W).

• For a PoE+ power supply kit, ClearOne recommends ClearOne part

number 910-3200-202. When no speakers are connected to the BMA

CT's, it can power up to three BMA CT devices.

• You can connect a PoE+ injector to a P-Link PoE port on a

CONVERGE Pro 2 (CP2), or connect it to the BMA CT's PoE+ port.

• If you connect the PoE+ injector to the BMA CT's PoE+ port, you

must also connect the CP2's P-Link Out port to the BMA CT's P-Link

In port.

PoE+ (56V/.64A/36W)

Power-source

selection switch