ClearOne Ceiling Microphone Array Dante 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} ClearOne Ceiling Microphone Array Dante에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne Ceiling Microphone Array Dante 7 페이지.

4. The holes in the mounts may also be used to attach a Ø3mm (Ø1/8")

safety cable. You must supply your own safety cable.

5. Run the 30 ft. CAT6 cable (included) from Junction Box to Junction

Box, and Junction Box to Interface Box.

6. Drill a 7/8" hole in the removed ceiling tile for mic cable pass-through.

7/8" Hole

Template

7. Place the ceiling adapter in the hole, and pass the drop cable through.

8. Tighten the washer snugly into place against the ceiling adapter.

9. Adjust the length of drop-down for the cable as needed.

10. Slide the collet cap up to the ceiling adapter, and tighten snugly.

QUICK-START GUIDE

7/8" HOLE TEMPLATE

1:1 SCALE

Drill 7/8" Hole for Placement of

Ceiling Adapter