ACOUSTIC SOLUTIONS SP150 매뉴얼 - 페이지 16
{카테고리_이름} ACOUSTIC SOLUTIONS SP150에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACOUSTIC SOLUTIONS SP150 17 페이지. Cd/hard drive audio jukebox
페이지 인쇄ADVANCED FUNCTIONS
rom in the CD drawer.
6. The SP150 will then prompt you to reboot the system
for the new database to take effect. This will require the
power to be turned off, and then on again using the
power button on the front panel (8).
:
COMPRESSION SETTINGS MENU
The compression settings menu allows changes to be
made to the compression bit rates and also to the automatic
compression process when in stand by.
The compression level can be altered to compress the
contents of the harddrive to different quality levels.
The choices are:
Most compressed
Normal
High quality
If you wish to store the maximum number of songs on the
hard drive, choose the setting "Most compressed", however
the audio quality will be the lowest. Conversely for the least
amount of songs stored but with the highest audio quality
choose 'High quality'.
The Factory default setting is Normal.
For every day use the normal setting will give a good
compromise between storage and sound quality.
Note: In the process of loading a CD into the SP150, you
are asked to decide if this CD is to be compressed later. If
a disc is required to be stored with ultimate sound quality
ensure that when asked to "compress later" the no option
is chosen. This will mean that this CD will be stored as a
faithful reproduction of the original without any compression
being applied.
To change compression settings:
1. From the menu Compress level, press OK on the remote
control (15) to select this menu.
2. The LCD display will show 'Most compressed', using
the arrow keys on the remote control (12 and 14) search
through Most compressed, High quality and normal.
page 16
�����������
128Kb
192Kb
320Kb
���� ����������
������ �����
3. When you have decided which compression level you
require press OK to select.
4. After 30 seconds of inactivity the SP150 will return to the
previous operating menu position.
The Compress Mode menu allows the automatic
compression process to be changed to a manual
operation.
The factory default setting is 'Compress auto'. This
means that the SP150 will automatically compress
un- compressed files when placed in standby power
mode.
Changing this setting to 'Compress manual' will mean that
the compression process will need to be started manually
by using the compression on/off menu as described in
previous chapters.
To change the compression mode:
1. From the menu Compress mode, press OK on the
remote control (15) to select this menu.
2. The LCD display will show 'Compress auto', using the
arrow keys on the remote control (12 and 14) scroll
between Compress auto and Compress manual.
3. When you have decided which compression mode you
require press OK to select.
4. After 30 seconds of inactivity the SP150 will return to the
previous operating menu position.
�����