Camos RV-532AH 사용 설명서 - 페이지 12

{카테고리_이름} Camos RV-532AH에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Camos RV-532AH 14 페이지. Rear-view system 5” tft lcd monitor & camera

Installation

Usually the transmitter and receiver module must be mounted inside the

vehicle.

The transmitter should be attached as high as possible in the rear of the

vehicle. It can simply be fixed by screw or the enclosed adhesive/Velcro

tape.

The receiver should be installed, if possible, in the same high like the

transmitter, for example on the dashboard close to the monitor.

To achieve best transmission, you should avoid obstacles (walls, persons,

etc.) between transmitter and receiver.

Metallic barriers may completely impede the transmission; in this case you

have to change the position of the modules.

Using a (camping) trailer, the receiver can be installed in the rear of the

vehicle (if coverage is insufficient).

In this case the receiver module must be connected to the monitor with an

additional extension cable (available from specialized dealers).

Due to technical factors it is possible that the range of the video signal is

higher than the range of audio signal - especially in threshold areas (noise,

interference).

In this case we would recommend to reduce the monitor's volume.

Camera

Receiver

Transmitter

Monitor

Tail Light