1 BY ONE Audio-Technica AT3600 사용 설명서 - 페이지 10

{카테고리_이름} 1 BY ONE Audio-Technica AT3600에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 1 BY ONE Audio-Technica AT3600 14 페이지. Belt drive turntable with built in speakers

페이지 인쇄

Replacing the Stylus

It's suggested to replace the stylus after 400 hours of use.

Removing the Stylus

• In addition to the deterioration of sound quality, records may also be damaged as

the cartridge's stylus tip wears down.

• Be sure to disconnect the product's AC adapter from the outlet.

• When replacing the stylus, hold the headshell and the cartridge body tightly.

Rotate the front of the stylus in a forward and down motion.

Installing a New Replacement Stylus

1.Mount the new replacement stylus to the cartridge.

2. Lift the stylus up until you hear a click

3. Make sure there is no gap between the headshell and the cartridge.

Engage in body ﬁrst

Replacing the Belt

• The belt is a consumable part. Replace the belt if the speed of playback slows down

or irregular rotation occurs. As a rule of thumb, we suggest replacing the belt once a

year.

• Before replacing the belt, be sure to disconnect the product's AC adapter from the

outlet.

1. Remove the slip mat.

2. Remove the main platter and then remove the old belt.

3. Loop the new belt around the sub-platter and motor pulley.