ClearOne IDCam 사용자 설명서 - 페이지 8
{카테고리_이름} ClearOne IDCam에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne IDCam 12 페이지. Flexible camera series
ClearOne IDCam에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (10 페이지)
페이지 인쇄12
Troubleshooting
Problem
Suggestion
TV does not have an S-video
Use the S-video to composite adapter to convert
input.
the S-video signal to a composite signal for your
TV or VCR.
There is no video on TV
Ensure that the camera, TV and VCR are plugged
monitor when connected to
into power supplies and turned on.
a VCR.
Ensure the camera is properly connected to the
VCR. The yellow plug on the camera should
connect to the video in jack on the VCR.
Make sure the TV is on the correct channel for
video (channel 3 or 4). Consult your TV user
manual.
How do you connect the
Use an S-video to USB adapter (recommended)
camera to a computer?
or install a video card in your computer (not
supported).
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Flexible Camera Series — Troubleshooting
Flexible Camera Series — Appendix
Appendix
Specifications
Image Pick-up Device
1/4" CCD (6.35 mm)
TV System
NTSC, PAL
Total Pixels
IDCam, StudentCam, TeachCam
NTSC and PAL: 410 K
Total Pixels
FlexCam
NTSC: 266 K, PAL: 315 K
Number of Effective Pixels
IDCam, StudentCam, TeachCam
NTSC: 768(H) x 492(V)
PAL: 752(H) x 512(V)
Number of Effective Pixels
FlexCam
NTSC: 512(H) x 492(V)
PAL: 512(H) x 582
Number of Scanned Lines
NTSC: 525 lines
PAL: 625 lines
Frames per Second
NTSC: 30 fps
PAL: 25 fps
Resolution
IDCam, StudentCam, TeachCam
Horizontal
NTSC, PAL: Minimum 480 TVL (center area)
Vertical
NTSC, PAL: Minimum 480 TVL (center area),
Resolution
FlexCam
Horizontal
NTSC, PAL: Minimum 330 TVL (center area)
Vertical
NTSC, PAL: Minimum 330 TVL (center area),
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
S/N Ratio
6 dB: Condition: AGC off, weight on
Minimum Illumination
IDCam, StudentCam, TeachCam
1.5 lux at F2.0
Minimum Illumination
FlexCam
3 lux at F2.0
White Balance
Auto
Iris
Electronic
Gain Control
Auto
Sync. System
Internal only
Power Supply
12 VDC
Operating Temperature
14° F to 122° F (-10° C to 50° C)
Storage Temperature
-4° F to 140° F (-20° C to 60° C)
Indicator
Power On/Off LED
Audio
Integrated condenser microphone with
preamplifier for line-level output
Connectors
1 S-video output
1 Line-level (audio) output
1 Power input
Part Numbers
FlexCam
910-171-110
IDCam
910-171-125
StudentCam
910-171-120
TeachCam
910-171-150
13