ClearOne CONNECT AVB 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} ClearOne CONNECT AVB에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne CONNECT AVB 16 페이지. Network audio bridge for converge pro & sr products
페이지 인쇄CONNECT NETWORK BRIDGES
NOTE: Save the CONVERGE Console site file before performing
any firmware upgrade.
1.
Download the 4.2.X firmware file to the stack of units.
2.
The units will default and reboot after the download of 4.2.X
firmware.
3.
Units are fully upgraded.
4.
Verify units have been upgraded by checking the firmware version
on the front panel.
Reconnect all E-bus cables, if needed, to complete the stack of units.
SET THE DEVICE ID
Set each CONNECT CobraNet and CONNECT AVB unit to a unique ID
using the Device ID selector rotary switch on the back of the unit. (Range
0-7) Each CONNECT unit in any site needs a unique Device ID. Only 8
units are allowed in any site.
Device ID Rotary
Selection Switch
4