ClearOne CONNECT CobraNet 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} ClearOne CONNECT CobraNet에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne CONNECT CobraNet 16 페이지. Network audio bridge for converge pro & sr products
페이지 인쇄Quick Start Summary
These steps must be done in the following order to use the CONNECT
network audio bridge in your CONVERGE Pro Site:
1.
Update the CONVERGE Pro firmware to version 4.2.X using
CONVERGE Console.
2.
Set the Device ID of the CONNECT CobraNet and/or CONNECT
AVB using the Device ID rotary selector switch at the back of the
bridge.
3.
Connect the CONNECT CobraNet and/or CONNECT AVB to the
updated CONVERGE Pro/SR via the Expansion bus (E-bus).
4.
Update the CONNECT network bridge firmware
5.
Configure the CONNECT CobraNet and CONNECT AVB with
CONVERGE Console.
UPDATE THE CONVERGE PRO FIRMWARE
Update your CONVERGE Console to version 4.2 or higher. CONNECT
CobraNet and CONNECT AVB network audio bridges are not recognized
by systems running older versions and the 4.2.X versions offer significant
upgrades from previous versions.
ClearOne strongly encourages users to upgrade all firmware to the latest
release version.
Instructions for updating from version 1.X 2.X and 3X are detailed later in
this document.
QUICK-START GUIDE
3