ClearOne UNITE 160 사용자 설명서 - 페이지 17
{카테고리_이름} ClearOne UNITE 160에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne UNITE 160 19 페이지. 4k camera
ClearOne UNITE 160에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄UNITE 160 4K Camera
4.8 Communication Setup
When in the main menu page, move the cursor to
[Communication Setup] and press the [HOME]
key to confirm and enter the Communication
Setup page as shown here.
Protocol: Auto, VISCA, PELCO-D, PELCO-P .
V_Address: 1 ~ 7 (Effective in Auto, VISCA
protocol).
V_AddrFix: On, Off (When set to On, the 88
30 01 FF command does not work. Effective in
Auto, VISCA protocol).
P_D_Address: 0 ~ 254 (Effective in Auto, PEL-
CO-D protocol).
P_P_Address: 0 ~ 31 (Effective in Auto, PEL-
CO-P protocol).
Net Mode: Serial, Paral (Effective in Auto, VISCA
protocol).
Baudrate: 2400, 4800, 9600, 38400.
4.9 Restore Default
When in the main menu page, move the cursor
to [Restore Default] and press the [HOME] key
to confirm and enter the Restore Default page as
shown here.
Restore: Yes, No.
Notice
When "Yes" is selected and confirmed with the [HOME] key, all parameters will be restored to
their default values, including the IR Remote address and VISCA address.
Note: GUI menu and parameters are subject to change without notice.
13
Back to Table of Contents
DOC-0501-001v1.0
User Manual
November 2022