Alton EVOLUTION EVSTA2506M 사용 설명서 - 페이지 6

{카테고리_이름} Alton EVOLUTION EVSTA2506M에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alton EVOLUTION EVSTA2506M 18 페이지. Aluminium staging and shelving

Staging Installation

This example shows the 25 inch staging, the same installation techniques apply to the 20 inch staging.

890mm

Start by making a pencil mark on each side glazing bar, the corner bar

and the gable glazing bars. You can set the height of your staging to what ever suites your needs,

but the optimum position is 890mm from the floor, this will give you a finished working height of

900mm (standard kitchen worktop height). If you are planning on sitting at the staging you may

want to consider fitting it at 750mm from the floor.

Once all the small brackets are fitted you can attach the first staging arm (diagram 7). Fix it to the

small brackets on the corner bar and the gable bar, once fixed check with a spirit level and adjust if

necessary. Do the same for the opposite end of the run.

Diagram 7