CLEARSCAN CWK-CS-1020 운영 매뉴얼 - 페이지 6

{카테고리_이름} CLEARSCAN CWK-CS-1020에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CLEARSCAN CWK-CS-1020 8 페이지. Portable uv-c sanitizer
CLEARSCAN CWK-CS-1020에 대해서도 마찬가지입니다: 운영 매뉴얼 (6 페이지)

페이지 인쇄
CLEARSCAN CWK-CS-1020 운영 매뉴얼

OPERATION

�
Push the clip of CLEARSCAN upwards
with enough force to pull out the inner
body until a click sound is heard and
the power button is seen.
�
Position the lamp within 1/2 an inch
from the desired object to be sanitized.
Turn on the device to start sanitizing.
(Be wary of UV-C exposure)
SAFETY GYRO FUNCTION
5
�
Press the power button for 1 second to turn
on the device. Single operation will last for 20
seconds and will shut down itself
immediately after.
�
Press the button once again to turn off
the device at any moment during the
operation.
In order to protect the user's eyes,
CLEARSCAN has a built in Gyro sensor function
where if the device were to rotate over 90 degrees,
it will shut itself down.
To use the device without activating
the Gyro sensor, simply hold the power button
when rotating more than 90 degrees
PRECAUTIONS
(1) Do not expose body parts directly to UV-C light.
(2) Do not look directly into the lamp light.
(3) Keep away from children.