Altor ATDAC-10S3 사용자 설명서 - 페이지 6

{카테고리_이름} Altor ATDAC-10S3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Altor ATDAC-10S3 8 페이지.

Using external amplifier control:

ATDAC-10S have galvanic isolated digital (dry contact, i.e. - open collector) output which

is dedicated to control the external amplifier. Dry contact is closed (short) if ATDAC-10S

is not in standby. 3.5mm Jack is used for connection.

See below the electrical schematic of this output.

Cable recommendations:

Use only high quality cables according your preferences and possibilities!

Specially pay attention to the input cables:

USB cable: - do not use thin and very long cables. 0.5-1m is the reasonable length.

SPDIF cable: not all regular interconnect RCA cables are capable to operate in high

frequencies.

Optical TOSLINK cable: not enough quality cable may not operate in 192kHz or even at

96kHz sample rate. Also for some cheap cables degradation with time (aging) was

observed.

10R

®Altor Co

Altor

A U D I O

Netanya, Israel