Aimpoint CompM5b 사용자 설명서 - 페이지 14

{카테고리_이름} Aimpoint CompM5b에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aimpoint CompM5b 20 페이지.

2.6 Custom turret and custom turret ring

The custom turret allows an operator to customize the sight by creating elevation

settings to adapt to any ballistic profile.

Preparations

a Put the custom turret ring on the custom turret.

b Install the assembled custom turret and custom turret ring to the sight by following

instructions in 2.3.

c Perform zeroing in accordance with instructions in 2.4. When zeroing, ensure that the

custom turret and custom turret ring is set to its starting position ("A" / Fig. 6).

d Loosen and remove the spring lock with the T10 Aimpoint tool. Alternatively, use the

hex key socket on the drill tool guide to loosen the spring lock ("B" / Fig. 6)

e Install the drill guide to the sight as shown in "C" / Fig. 6. The drill tool guide ensures

that the drill does not damage the turret when creating a mark.