Aimpoint Duty RDS 사용자 설명서 - 페이지 8

{카테고리_이름} Aimpoint Duty RDS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aimpoint Duty RDS 12 페이지.

2.4 Zeroing

CAUTION: Do not continue to adjust windage and

elevation screws (6) (7) if you encounter resistance.

a Adjust the intensity to a comfortable setting for the red

dot to contrast clearly against the target.

b Fire at least three shots to evaluate points of impact.

c Use the Torx T10 tool (3) to turn the adjustment screws.

d Windage adjustments (see Fig. 4):

• Turn windage adjustment screw (6) counterclockwise

to move point of impact to the right (R).

• Turn windage screw (6) clockwise to move point of

impact to the left.

e Elevation adjustments (see Fig. 5):

• Turn elevation adjustment screw (7)

counterclockwise to move point of impact up (U).

• Turn elevation adjustment screw (7) clockwise to

move point of impact down.

f Confirm zeroing by firing at least three shots at

a zeroing target and repeat zeroing procedure if

required.

g Ensure the sight is securely installed on the weapon

and retighten the screw (12) if neccessary.

NOTE: Each click of the adjustment screws corresponds

to movement of point of impact of approximately 15 mm at

100 m / 0.5 in at 100 yds (0.5 MOA per click).