ClearSounds A1600E 운영 매뉴얼 - 페이지 6
{카테고리_이름} ClearSounds A1600E에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSounds A1600E 20 페이지. Amplified cordless expandable handset
ClearSounds A1600E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (19 페이지), 콰이드 설정 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Base Desk/Table Mounting
1. Plug the AC power adapter into the jack on the back of the
base, then plug the AC adapter into a standard electrical
outlet or surge protector.
Note: The adapter is required for the phone to work.
Installing Batteries
Three
AAA
batteries come with your phone. You
must install the handset batteries
before using your phone.
1. Remove the battery compartment
cover by sliding it downwards.
2. Insert the new batteries. Be
sure to observe battery polarity
as imprinted on the inside of
the compartment.
3. Replace the battery compartment cover by sliding upward
until it clicks into place
Note: The batteries need to be replaced if they do not recover
their full storage capacity after recharging. Check the battery
icon on the LCD to see the battery charge level.
When replacing the batteries, always use good quality Ni-MH
AAA re-chargeable batteries.
re-chargeable
Ni-MH
6 – ENGLISH