ClearSpan 103434 사용 설명서 - 페이지 2

{카테고리_이름} ClearSpan 103434에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan 103434 7 페이지. Backyard canopy 10' wide x 20' long

Introduction
Thank you for purchasing the ClearSpan
hope you enjoy building and utilizing your shelter. Please read this entire instruction manual before
starting to assemble your shelter. If you require assistance during the construction process you may
call us at 1-800-245-9881.
A Word About Safety
Just as we want you to be pleased with your assembled canopy, we donʼt want you to get hurt in the
process of building and using it! Our comments and suggestions include the following:
• The ClearSpan
permanent structure.
• The structure is not meant to support ice or snow. As such, ClearSpan
guarantee this canopy if used in ice or snow.
• ClearSpan
TM
not be responsible for damage caused by or to the canopy.
• Proper anchoring is the responsibility of the buyer and owner/user. Ask your ClearSpan
representative if you need assistance with anchoring choices. ClearSpan
responsible for damage caused by failure to properly anchor the canopy.
• Do not place or use any open flame or other heat source under or near the canopy.
• Use a portable GFCI when working with corded power tools.
• Never erect a canopy directly under power lines.
• Be careful not to drive anchors into buried power cables.
• Do not climb on the canopy or its frame. It is not designed to support human weight.
• Do not occupy the canopy during high winds, hurricanes, or tornadoes.
• If the canopy is moved or disassembled after construction, inspect thoroughly before reuse.
• Use common sense at all times.
Suggested Tools
Before you start to build your shelter you should assemble the following tools:
• Tape Measure
• Step ladder tall enough to safely work at the height of your shelter
Backyard Canopy is a temporary structure and is not designed as a
TM
has no control over occurrences of wind, snow, ice, and heavy rain, and can
Backyard Canopy. We appreciate your patronage. We
TM
Page 2
does not
TM
TM
will not be
TM