ClearSpan 1040SS 매뉴얼 - 페이지 11

{카테고리_이름} ClearSpan 1040SS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan 1040SS 18 페이지. Add-a-bay shade

INSTALL THE MAIN FRAME COVER

After the frame is properly assembled and anchored, install

the main cover.

Gather the parts:

•

Snugger ball tie downs (#CC4595)

•

Main cover

NOTE: Assistance is required to install the cover.

NOTE: Dashed lines show where to attach the

main cover to the frame. The main cover will not

wrap around the frame piping.

1. Locate the main cover, unfold it along the assembled

frame, and drape it over the frame and into position.

2. Take the snugger ball tie downs, feed the stretch cord

through a grommet, and attach the main cover to

the assembled frame. Use one snugger ball for each

grommet.

3. Continue with the shelter care and maintenance

information that follows.

Revision date: 10.04.07

WARNING: To prevent property damage

and personal injury, do not install the

cover on a windy or stormy day.

Visit www.ClearSpan.com for additional products and customer assistance.

CLEARSPAN

A space will remain between the edge of the

main cover and the frame. See the inserts

below and to the left.

SUNBLOCKER SYSTEM

™