ClearSpan 104449 사용 설명서 - 페이지 9

{카테고리_이름} ClearSpan 104449에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan 104449 15 페이지. Poly shelters sunblocker pavilion

Step 7: Install a 2 socket cross coupling at the middle of the chord.

Step 8: Connect the chord to the legs via the 3-way "Ts" previously installed.

Step 9: Repeat the steps above to assemble the other end rafter exactly like the one you just made.

Step 10: Assemble your inside rafters. These are similar, but do not have the horizontal chord or

diagonal corner braces. Inside rafters have crossover fittings at the peak and just below the

bends in the leg sections.

Step 11: Add swivel sockets to the legs of both end rafters and 2 of the inside rafters. These will

later be used to connect diagonal struts. Look at the frame drawing to approximate the

locations of these couplings. On the legs of the end rafters, the should be a foot or so below

the bend. On the two inside rafters they should go a foot or so up from the bottom ends.

Typical Inside Rafter

Page 9