ClearSpan 105758 설치 지침 - 페이지 4

{카테고리_이름} ClearSpan 105758에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan 105758 5 페이지. Frame kit

This anchor kit is not designed for larger shelters or for use in sand or on hard surfaces such as asphalt or

concrete. Installing ground stakes at each frame support is required for proper support of the shelter.

ATTENTION: Use the 6' straps (with ratchets) for the 9' and 2' tall storage bags/shelters.

STEP : Remove the protective plastic sleeve.

STEP 2: At each frame support pipe, measure at least

three feet (3') in the desired direction and twist a

ground stake into the ground.

STEP 3: Twist stake clockwise until triangular top

touches the ground.

STEP 4: Hook the attached S-Hook in the eye of the

eyebolt assembly.

Visit www.ClearSpan.com for additional products and customer assistance.

Anchor Kit 03599

Installation Instructions

STEP 5: Insert the loose end of long strap into the

ratchet and tighten to keep strap in place.

STEP 6: Hook the remaining S-Hook through the

triangular top of the ground stake and tighten the

ratchet.

NOTE: If the strap

buildup is too great

in the ratchet, loosen

the ratchet, remove

excess strap, and

retighten the ratchet.

DO NOT remove too

much strap.

STEP 7: Repeat the steps as needed to secure each

frame support pipe to a ground stake.

Top View

Storage Bag

Dashed lines represent ground anchor straps.

ATTENTION: DO NOT OVERTIGHTEN RATCHETS.

Diagram shows how

to position straps and

ground stakes at each

corner for proper

support.