Altra Industrial Motion Warner Electric PB-400 설치 지침 매뉴얼 - 페이지 2
{카테고리_이름} Altra Industrial Motion Warner Electric PB-400에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altra Industrial Motion Warner Electric PB-400 18 페이지. Primary brakes
페이지 인쇄Send Quote Requests to [email protected]
Contents
Installation Instructions
PB-120 PB-170 PB-250 PB-400 . . . . . . . . . 2-9
Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . 5
Drawings and Parts Breakdown or Exploded Views
PB-120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
PB-170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
PB-250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
PB-400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
2 Warner Electric • 800-825-9050
PB-170
PB-400
Send Quote Requests to [email protected]
Call +1(800)985-6929 To Order or Order Online At Warnerelectricparts.com
Call +1(800)985-6929 To Order or Order Online At Warnerelectricparts.com
Follow the installation instructions in this manual
carefully to ensure safe, reliable operation. All
stated or implied manufacturer warranties are void
if this product is not installed in accordance with
these instructions.
Failure to follow these instructions
may result in product damage, equipment damage,
and serious or fatal injury to personnel.
Primary Brake
PB-120 PB-170 PB-250 PB-400
The illustration drawings, parts lists, and exploded views
for these units can be found beginning on page 10 .
A. Installing the Conduit Box
To install the conduit box on the size 400 unit, refer to
the instructions supplied with conduit box .
B. Mounting the Magnet
The brake magnet is mounted to a stationary machine
member by a flange . Extreme care must be taken in
se lect ing the location for the mounting of the magnet .
Proper positioning is very important for the unit to
function correctly .
1 . A pilot diameter on the mounting surface is essential
to hold the magnet within the required tolerances
(Figure 1) .
2 . A machined pilot diameter is provided on the magnet
mounting flange (refer to illustration drawings page
10-17) to aid in the proper positioning of the magnet .
Figure 1
Mounting
Surface
Magnet
Pilot
Diameters
P-201-WE • 819-0480