Dixon Automatic Tool SKC-PTA-B35F 운영 및 유지보수 매뉴얼 - 페이지 3

{카테고리_이름} Dixon Automatic Tool SKC-PTA-B35F에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dixon Automatic Tool SKC-PTA-B35F 12 페이지. Automatic industrial cordless brushless power torque screwdrivers series

페이지 인쇄

Read all instructions and make sure the appearance of the device has no damage before you use it.

Failure to follow all instructions listed below may result in electric shock fire and/or serious injury.

1. Keep the working area nice and clean.

1.1 Mess and dark areas may cause of accidents.

1.2 Keep the device away from rain or moisture to decrease the risk of electric shock or short-

circuiting occurred.

Be alert to workplace safety

2.1 Use the device under a well lit and clean environment.

2.2 Keep children and other people away unless the person has been assigned for the task to avoid

the danger of injury.

2.3 Do not play around while the tool is being used to avoid the danger of distractions.

2.4 Do not work with the device in potentially explosive environments in which there are

inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts

or fumes.

2.5 Do not use the device if you are tired or under the influence of drugs, alcohol or medication.

3. When the devices are not being used, store them in a safe place.

4. Use a suitable device for the job will be safer at work and have a better result.

5. Always use a screwdriver that is intended for the task you are undertaking. Do not overload or use

it improperly such as drilling or tapping.

6. Dress properly. Do not wear loose clothing or jewels while operating the tool to avoid the danger of

trapping.

7. Please hole the cordless screwdriver carefully before operating and avoid wrong operating method

8. When using the electrical power tool, take into account the auxiliary handle or waist hook is

advantage of working conditions. On the contrary, the purposes of the waist hook or driver hook is

convenient to put the device away and easier to keep it out of reach of children.

9. Look after either the device or the battery carefully and have any damaged parts repaired by an

authorized or qualified shop. Always keep the tool nice and clean; pay attention on the machine

grease which might ruin the tool.

10. Disconnect the plug from the power source after the charger has been used.

11. Take apart the battery from the device when it is not being used.

12. Use only the accessories that are detailed in the operating instructions. The use of others which are

not recommended in the operating instructions may affect the functioning of the device. It could

lead to an increased risk of personal injury as well.

13. Remain alert at all times and watch what you are doing during proceeding. Before operation,

always check every part is in good condition and move freely in order to function properly.

14. This device only applies for metal screw bits designated with their dimensions and their shape. Do

not recommend to countersink or force of loading on any material such as plastic and wooden.

15. The device does not apply for elastic or tensile load with washer on.

Warning