Dixon Automatic Tool SKC-PTA-BE120 운영 및 유지보수 매뉴얼 - 페이지 13
{카테고리_이름} Dixon Automatic Tool SKC-PTA-BE120에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dixon Automatic Tool SKC-PTA-BE120 17 페이지. Automatic industrial cordless brushless power torque screwdrivers
페이지 인쇄Screw fastening process
4.Set up functions
Settings
1.
Auto learning
mode
P
+
S
2.
Connection to
wireless
controller
Up+Down
->SL->SC->At->RC->SP->HC->LC->Ht->LT-->END
(Complete process)
Step1: Step1: Press P+S simultaneously for 5 sec., screen
will be flashing and greed LED will be on.
Step2: Start to set up functions step by step until shows HC,
use actual workpiece and screw to set up HC. (max.
fastening no. of thread)
Step3: When setting completes, press S to save settings.
Settings will be saved after screen flash 2 times.
Set up this function to connect to wireless controller
(KL-WSCBSN)
1. Default set as not connected. Press Up+Down
simultaneously for 10 sec. to change connection status.
2. To disconnect, press Up+Down simultaneously for 10 sec.
to disconnect
Functions
Description
12
Remark
1. If no workpiece and
screw were not used
during HC setting. It
will auto save as 99.9
2. After HC settings
complete, HT and LT
will also be shown.