Dixon Automatic Tool SKC-PTA-BE50F 운영 및 유지보수 매뉴얼 - 페이지 7

{카테고리_이름} Dixon Automatic Tool SKC-PTA-BE50F에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dixon Automatic Tool SKC-PTA-BE50F 17 페이지. Automatic industrial cordless brushless power torque screwdrivers

페이지 인쇄

1. Full auto shut-off screwdriver:

It stops automatically when the screw has been tightened up and reached the set-up torque level.

The device will not cause damage of task since no continue running after screws are tightened.

(1) Trigger switch:

The LED lights on when the trigger switch has been pressed about one-third down, and then the

screwdriver starts functioning when the switch trigger has been pressed half way down; on the

contrary, it stops when the screw has been tightened up or the trigger has been released.

(2) Forward / Reverse switch:

When the switch turn to the right as arrow indicates, the screwdriver will be clock-wise

screwing to tighten things up; Vice versa, left switch means to release the screw. As the diagram

showing, always set the switch to neutral position when the screwdriver is not being used.

(3) LED light:

While press the trigger, the LED lights up automatically to assist the job to be done; on the

contrary, it will be off once the trigger has been released.

(4) Bit Sleeve:

Switch the screw bit and compatibility, pull the head of the type B screwdriver, and install the

bit according to the diagram below, after installing the bit please also install the W type cap and

push it in following the arrow indicated on the diagram below on diagram #2.

Pull the bit holder

Insert the bit

Diagram 1

Manual / Function

Forward (screw)

Reverse (unscrew)

Insert adaptor follow

by socket

Diagram 2