Dixon Automatic Tool SKC-PTA-BE60 운영 및 유지보수 매뉴얼 - 페이지 10

{카테고리_이름} Dixon Automatic Tool SKC-PTA-BE60에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dixon Automatic Tool SKC-PTA-BE60 17 페이지. Automatic industrial cordless brushless power torque screwdrivers

페이지 인쇄

1.Panel function

Front part

Program Setting

POWER LED

(Red LED on bottom)

LED_OK

(Greed LED on top)

LED_NOK

(Red LED on top)

LED_OK ALL

(Green LED on top)

KEY LOCK

LCD display main menu

1. Battery status on upper left

2. Lock status on upper middle

3. Connection status on upper right

4. Screwdriver and settings status at bottom (3 digits/letters)

Remark:

1. If NS set as [Y], NS will be shown when tightening error occurred.

2. If AS set as [Y], AS will be shown at next start when lock is triggered.

3 digits at bottom displays screw list and

counting number.

1.First digits displays current working screw

list from [1]-[9]

2.Second and third digits display current

screw count. [99]-[01]

Screw List –----------------(SL) Screw List

Screw Count----------------(SC) Screw Count

OKAll alarm time----------(At) OKALL Alarm time when batch complete

Slow Start Time------------(RC) Slow Start Time

Speed Level ----------------(SP) Slow Start Speed (Full speed activated when slow

start time reached)

Max Fasten Thread---------(HC)Hi Thread (max. no. of fastening threads)

Min Fasten Thread----------(LC)Low Thread (min. no. of fastening threads)

Max Fasten Time-----------(Ht) Max. fastening time

Min Fasten Time------------(Lt) Min. fastening time

Local(In-place) shutoff-----(LS) To judge double hit

NG stop-----------------------(NS) Whether to lock the screwdriver or not when

error occurred

OK ALL stop----------------(AS) Whether to lock the screwdriver or not when a

batch complete

Gear Box Ratio--------------(GR) Gear ratio

Red LED on when low voltage

Green light on when a tightening correctly completed

Red light on when tightening time is higher or lower than max. and min fastening

time settings.

Greenlight on when 1 screw tightening complete or 1 batch complete.

To lock, turn the key clock wise, then operator cannot enter program setting menu.

LCD display will show a locked icon.

To unlock, turn the key counter clock wise. LCD display will show a unlock icon.

Description

Setting status

1. Forward rotation [FrD]

2. OK tightening [OK]

3. No ok tightening [NOK]

4. Batch complete [OK A]

5. Reverse rotation [REV]

6. Brake by forward/reverse

7. Auto Learning [Lrn]

8. Online mode [Cnt]

9. Off line mode [Dis]

9. Error code [Exx] xx : 00-99

switch [BrK]