ClearSpan Premium Solar Star 104918 조립 지침 매뉴얼 - 페이지 12

{카테고리_이름} ClearSpan Premium Solar Star 104918에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan Premium Solar Star 104918 17 페이지. Home-attached greenhouse

페이지 인쇄

31. Attach two 3" x 3" square flat brackets to the

underside of each upper side panel frame tube (on

the inside of the greenhouse) as shown above.

32. Locate the remaining roof support plates and attach

these to the underside edge of the installed roof

panels at the top.

Upper Roof Support

Plates

NOTE: The upper roof support plates are attached in the

same manner as the lower roof plates and in the same

pattern, beginning with a short section and ending with a

short section.

Visit www.ClearSpan.com for additional products and customer assistance.

33. With all roof support plates installed, set the two

smaller, upper roof panels in position as shown in

the next diagram.

NOTE: The front edge of the panel will rest on top of the

upper roof support plates. The top of the panel is flush

with the top of the angled end panel. See the following

diagrams.

Angled Side Panel

Back Edge of the Top Roof Panel (arrow)

View is from the back of the greenhouse.

Roof

Support

Plates

11 of 16