Dixon Bayco FT312 유지 관리 및 운영 지침 - 페이지 2

{카테고리_이름} Dixon Bayco FT312에 대한 유지 관리 및 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dixon Bayco FT312 5 페이지.

FT300 SERIES TRAILER MOUNTED SOCKETS

FloTech sockets are mechanically and functionally compatible with API 1004 Cargo Tank

Bottom Loading Recommended Practice. Socket faceplate and contact components are

interchangeable with Civacon socket bodies. Civacon is the registered trademark of Civacon /

Dover Corporation.

INSTALLATION INSTRUCTIONS:

Sockets are to be mounted on the same side of the trailer as the bottom loading equipment.

Sockets are normally located within 3 feet of the bottom loading adapters so the rack plug and

cord will reach the socket without over stretching the cord. Remove the socket faceplate and

hardware packet and set aside. Use the socket body as a template to drill two 11/32" holes as

shown in Diagram 1. Mount the socket body to the trailer using two 5/16 bolt and lock

washers. Make sure the grounding wire, large eyelet end is fastened under one of the 5/16

bolts.

877.582.3569

10158 REV F 2016/08/31