Dixon Bayco FloTech FT530 매뉴얼 - 페이지 3

{카테고리_이름} Dixon Bayco FloTech FT530에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dixon Bayco FloTech FT530 18 페이지. Trailer identification module reader

OVERVIEW

The Trailer Identification Module Reader(TIM Reader) is a battery

operated test instrument that uses a microprocessor to quickly verify the

wiring and operation of the Scully #8836 TIM Truck ID Module. It can be

used on systems that employ either an OPTIC or THERMISTOR socket.

The TIM Reader uses a single pushbutton switch to control all tests. Two

different test modes are available and can be easily selected at any time.

The first test mode is a QUICK TEST to verify correct operation while the

second test mode is a more thorough TROUBLESHOOTING TEST.

The SINGLE READ MODE TEST is used to quickly verify correct

operation of the Truck ID Module(TIM). The SERIAL NUMBER printed

on the TIM will be read and shown on the display of the TIM Reader.

The MULTI-READ MODE TEST is used to troubleshoot a TIM that either

doesn't work or that is intermittent in operation. The TIM is read by the

TIM Reader 999 times. During the test, the display will show the results

of how many GOOD reads and how many BAD reads it finds. One

advantage of this test is that the wiring and mounting of the TIM may be

probed during the test to help detect any faulty or intermittent wire

connections.

The RED PUSHBUTTON SWITCH on the Tim Reader is used to:



Select Single Read Mode Test



Select Multi-Read Mode Test



Select LCD Backlight for easier night viewing of the display



Stop Multi-Read Mode Test



Turn the TIM Reader off

The TIM Reader employs a NON-RECHARGEABLE LITHIUM BATTERY

that should last 5 years in normal operation. The battery condition is

tested every time the TIM Reader is used. A low battery condition will

show "LOW BATTERY" on the display for 3 seconds before starting a

test.