3G Audio AK80 사용자 설명서 - 페이지 9
{카테고리_이름} 3G Audio AK80에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3G Audio AK80 12 페이지. Stereo amplifier
페이지 인쇄OPERATION
The amplifier is ready for use when you finish connecting it to speakers and
plugging in the signal connector following the manual. Here are the instructions
for correct operation of the instrument:
1. Switch on the power (4) (see page 5).
2. Adjust volume
Adjust volume in stereo mode:
Turn the L channel volume knob (6) with a slotted screwdriver clockwise/anticlockwise
to increase/reduce the volume until you feel satisfied.
Turn the R channel volume knob (5) with a slotted screwdriver clockwise/anticlockwise
to increase/reduce the volume until you feel satisfied.
Adjust volume in mode/bridge mode:
Turn the R channel volume knob (5) with a slotted screwdriver clockwise/anticlockwise
to increase/reduce the volume until you feel satisfied.
3.Tone adujustment
Adjust tone in any mode:
Turn the bass volume knob (5) with a slotted screwdriver clockwise/anticlockwise
to increase/reduce the volume until you feel satisfied.
Turn the treble channel volume knob (5) with a slotted screwdriver clockwise/anticlockwise
to increase/reduce the volume until you feel satisfied.
4.Feet installation
Optional feet are available for standing the amplifier.
You need not mount the feet if you want to install the amplifier in the rack of a case.
If you want to lay the amplifier on a desk or other horizontal surface you must
mount the feet according to the following steps:
Take out the (four) feet from the package.
1
Insert the feet in the mounting holes at the bottom of the amplifier
2
Insert the locking pins in the center of the feet.
3