AIMS PWRINV2.5K24V 조립 및 작동 지침 매뉴얼 - 페이지 7
{카테고리_이름} AIMS PWRINV2.5K24V에 대한 조립 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AIMS PWRINV2.5K24V 9 페이지. 2500 watt / 5000 watt peak input voltage 24 volts dc
페이지 인쇄6.
Remote On/Off Switch
A Remote On/Off Switch can be connected to the Remote Jack allowing you to
turn the inverter On or Off from a convenient location when the inverter is installed
in an out-of-reach location. Be sure to have your power inverter and Remote On/Off
Switch properly installed before attempting to turn the unit On(see "Installation"
page 6). Before connecting the remote switch you should ensure the inverter is
turned OFF (O). Then plug the remote switch into the jack. The main power switch
of the inverter must be turned ON (I) for the remote switch to function properly.
You may now use the remote switch to turn the inverter ON (I) and OFF (O).
Indicator Light
1.
Keep this unit clean and dry. Unplug the unit before cleaning. Clean only the
outside of this unit with a soft, dry cloth; never clean this unit with water or
harsh cleaners.
2.
The fuses can be replaced by user.If you are sure that the fuses are blown,
and you want to replace them, you must turn off the power first, then you should
disconnect the inverter from the batteries. Now you are ready to open the fuse
cover and replace or check the fuses.
3.
This device does not contain any other user replaceable parts.If it needs
service,contact your retailer or AIMS Power(see warranty page for details).
Fuses can be replacement by user.
BOTTOM
Fuses(inside)
Maintenance
P
a
g
e
7