Dixon Bayco 200-PV-9 설치 및 운영 지침 - 페이지 3
{카테고리_이름} Dixon Bayco 200-PV-9에 대한 설치 및 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dixon Bayco 200-PV-9 5 페이지. Pressure / vacuum relief cap for mobile fuel tanks
페이지 인쇄
200-PV-9 Pressure / Vacuum Relief Cap for Mobile Fuel Tanks
To properly operate and maintain your Dixon Bayco pressure /
vacuum relief cap the following instructions are provided. Please read
with care as improper handling or maintenance may cause a
hazardous condition.
Dixon Bayco pressure / vacuum relief caps feature a 2" male NPT
pipe thread. Ensure both cap and tank threads are clean and
undamaged before attaching cap to tank.
The 200-PV-9 is intended for mobile tanks. Due to the internal
pressure build caused by the sloshing of fuel and heat expansion,
vents for mobile tanks do have a higher opening pressure than vents
used on stationary tanks. The pressure vent in the 200-PV-9 cap
opens at between 7.5 & 9 Psi, which means that there could be up to
this pressure in the tank at any given time. With pressure in the tank,
when you remove the vent cap the tank will equalize to atmosphere,
this is considered normal.
Warning to Prevent Possible Injury
Remove the vent cap slowly, this will allow any residual
tank pressure to vent to the atmosphere. If someone were to
quickly spin the cap off, depending upon the volume of trapped
vapor in the tank, the cap could potentially lift off the tank when
it is completely un-threaded.
The 200-PV-9 also has a built in vacuum relief valve which is
designed to open at 1" Hg, this allows air to enter the tank when the
pump is operating. As the vacuum vent does not open until 0.33" HG,
up to 0.33" HG of Vacuum can be held in the tank, so when you
remove the vent cap you will hear the tank equalize to atmosphere,
this is considered normal.
Do not modify your Dixon Bayco pressure / vacuum relief
cap for any reason. Modification can result in a hazardous
condition due to operating difficulties or operation malfunction.
Disassembly or tampering will void the product warranty.
200-PV-9
Installation
Product Use
877.582.3569
3