Altrad Belle RTX 68 운영자 매뉴얼 - 페이지 9

{카테고리_이름} Altrad Belle RTX 68에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altrad Belle RTX 68 15 페이지.

Pre start-up inspection

Thoroughly inspect the RTX for signs of damage.

leaks before operating.

Check the Engine Oil level and top up as necessary.

level. To achieve this place the Rammer in the position shown below.

Check the Engine Fuel level and top up as necessary. Use clean Fuel. Use of contaminated

Fuel may damage the Fuel system.

NOTICE: This machine uses Unleaded Gasoline/Petrol.

CAUTION

NEVER

6.2

The minimum level is shown by the Red Dot on the Oil Sight Glass within the Rammer Leg. (SAE 10W-30 Mineral Oil

The chemical composition of fuel will deteriorate after prolonged storage. When the machine needs to be

Clean up oil and dust accumulation on rubber parts.

Clean the ramming shoe and apply a light coating of oil to prevent rust formation.

Cover the machine and store in a dry place.

Pre-Start Checks

Rammer Leg Oil

Check Position

Engine Oil

Check Position

(Petrol Only)

RTX must not be used until the fault

(Petrol Only)