ClearSpan 4040SS 매뉴얼 - 페이지 6
{카테고리_이름} ClearSpan 4040SS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan 4040SS 18 페이지. Dimensions 40' w x 40' l x 10' h 40' w x 60' l x 10' h 40' w x 80' l x 10' h
페이지 인쇄CLEARSPAN
SUNBLOCKER SYSTEM
™
OVERVIEW
This section shows the typical shade system frame and its
connections. The illustration below helps identify the main
parts of the shelter.
1. Locate the required parts for each assembly procedure.
2. Assemble the frame components.
3. Assemble and anchor the frame.
4. Prepare and install the cover.
6
Visit www.ClearSpan.com for additional products and customer assistance.
Add-A-Bay Shade System
Rafters
Frame length shown may differ from actual frame.
SunBlocker™
IMPORTANT: Cross ports of the 5-way coupler are divided by the
through port of the same coupler. There are two (2) cross ports
and one through port for each coupler. See below for details.
Through Port
Cross Port
Purlins
Leg
Cross Port
ATTENTION: Position screws
so they will not touch the cover
when it is installed.
Revision date: 10.09.07