ClearSpan 103702 사용 설명서 - 페이지 4

{카테고리_이름} ClearSpan 103702에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan 103702 7 페이지. Poly shelters greenhouse bench

Step 3: Lay your U-shaped frame assembly up side down on the ground as follows:

• With the small groove DOWN if using an expanded metal top

• With the small groove UP if using a plywood, polymax sheet, or other top material

Step 4: Slide (2) band clamps onto each cross support tube

Step 5: Slide the first cross support tube into the channel in the side rails of your frame. Position it

so the centerline of the tube is 12-1/2" from the end rail.

Step 6: Install remaining cross supports spaced 24" on center from each other.

Step 7: After checking the positions of your cross supports, secure them in place with a single Tek

screw at each end through the channel into the cross support tube.

Step 8: Slide (2) band clamps onto each leg tube.

Step 9: Attach (2) legs to both of the outermost cross supports using a split "T" clamp for each leg.

Position the legs from the side rails using the distances given in the table below:

Width of Table Model

Leg Inset from Side

12"

Page 4