ClearSpan 2060SS1 사용 설명서 - 페이지 10
{카테고리_이름} ClearSpan 2060SS1에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan 2060SS1 18 페이지. Add-a-bay shade system
페이지 인쇄CLEARSPAN
SUNBLOCKER SYSTEM
™
FRAME ASSEMBLY (CONTINUED)
6. Review the diagrams in the Quick Start section for your
shelter to determine the locations of the remaining
diagonal struts.
Two (2) struts
attached
Three (3) struts
attached
20'-3" on-center
Frame length shown may differ from actual frame.
7. Install the diagonal struts. Each corner connection uses
two (2) struts, the mid connections use three (3) struts
and the center connections use four (4) struts. Refer to
Quick Start Guide for location and additional details.
Corner Connection
Center Connection
8. With the struts in position, tighten the band clamps.
9. Once the frame assembly is complete, verify that all
frame bolts are tight, anchor the frame, and install the
cover.
10
Visit www.ClearSpan.com for additional products and customer assistance.
Four (4) struts
attached
20'-3" on-center
Mid Connection
Space below is reserved for customer notes.
Revision date: 10.09.07