Diy Kyoto Wattson 매뉴얼 - 페이지 10

{카테고리_이름} Diy Kyoto Wattson에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diy Kyoto Wattson 13 페이지. Energy-saving device

페이지 인쇄

View your energy-use

history.

Wattson can store up to 4 weeks of energy-use history which can be

uploaded to your computer via the USB lead.

We have developed easy-to-use software (holmes) for your PC/Mac which

will allow you to look at the history of your electricity use over a period

of days, weeks or months. Please visit the users' page on

www.diykyoto.com/holmes to download the software.

The USB lead connects via the

socket on wattson's face.

Troubleshooting.

If this

No lights on your wattson when

you switch it on.

Your wattson displays 'out of range'

The sensor clip is chattering.

Can't attach the sensor clip

to your electricity wire.

Try this

1 / Make sure the display unit is

fully charged. Full battery charge

takes around 12 hours but wattson

can still display your energy use

whilst it charges.

2 / Reset wattson manually

(as described on page 16)

If wattson hasn't heard from the

transmitter for a little while it

will show 'out of range' on its

display. The display turns itself

off after 30 seconds, but will turn

itself on when it hears from the

transmitter again.

1 / Take wattson closer to

the transmitter.

2 / Check the batteries in the

transmitter are correctly inserted

and if necessary change

the batteries.

Try reconnecting the clip.

Make sure the clip top is secure

in the clip base.

If there is not enough space to

simply attach the clip to one of

the wires please consult a certified

electrician. They may be able to

fit the clip within your fusebox or

distribution unit. DO NOT under any

circumstance attempt this yourself.