ClearView IP-PT-885 설치 매뉴얼 - 페이지 15

{카테고리_이름} ClearView IP-PT-885에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearView IP-PT-885 19 페이지. 3-inch 2 megapixel

2). Connect the adapter block to the internal thread of the wall mount bracket. Pull the intelligent

speed dome composite cable through the adapter block and end of the column of the wall-mount

bracket and pull it out of the other end of the wall mount bracket. Line up the pedestal to the

internal hole of the adapter block. Insert four screws and rubber washer. See Figure 4-3. Please

make sure the cable exit is at the rear end of the wall mount bracket (or the arrow is at the front of

the bracket). Please note this step is very important. Please make sure the screws are firm,

otherwise, it may result in falling risk of the intelligent speed dome.

3) Complete the cable connection of the junction box and use 4 M8 screws to secure the wall

mount bracket in the box. Now the installation is complete. See Figure 4-4.

Figure 4-2

Figure 4-3