ClearView RT-RT110 설치 지침 매뉴얼 - 페이지 17

{카테고리_이름} ClearView RT-RT110에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearView RT-RT110 20 페이지.

Assembly Instructions

Flap Position Holes

Small & mid sized vehicles

Full size vehicles

Large sized vehicles

(Dual Axles, Motorhomes..)

21. Tighten the M5 FLAP RETAINER BOLTS on each side. Refer Image 6.

IMPORTANT: FLAP RETAINER BOLTS are not intended to hold FLAP CLAMP on FLAP

SUPPORT ROD. The RETAINER BOLTS must be used for proper positioning and safety.

22. Complete the assembly by

inserting the FLAP END CAPS into

the FLAP CLAMPS.

Refer Image 14.

Insert the Rock Tamers Bolt

Bumpers into the bolts.

Refer Image 15

23. The ROCK TAMERS® Mudflap

System is now ready to use. As a final

safety procedure, check bolts to

ensure that they are tight and

properly assembled. For optimum

service and life, check components

and the torque on all bolts prior to

each use.

Refer Image 16.

Flap Retainer Bolt

through both parts

clearviewaccessories.com.au

Slide carefully

Flap End Cap

IMAGE 15

IMAGE 16

Same as IMAGE 6

IMAGE 14

Flap End Cap