ClearView Hawk-08 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} ClearView Hawk-08에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearView Hawk-08 7 페이지.

4. Turn the device upside down

and then turn the screws in

firmly.

7. Put the cover in accordance

with the clip and then place the

upper cover back.

Note:

You can connect the HDD data cable and the power cable first and then fix the HDD in the

device.

Please pay attention to the front cover. It adopts the vertical sliding design. You need to

push the clip first and then put down.

4. Front Panel

The front panel is shown as in Figure 1.

Please refer to the following sheet for detailed information.

Name

Power button

Up/

、

Down

Fix the HDD firmly.

8. Secure the screws in the

rear panel and the side panel.

Figure 1

Icon

Function

Power button, press this button for three seconds to boot up

or shut down DVR.

Activate current control, modify setup, and then move up

and down.

Increase/decrease numeral.

Assistant function such as PTZ menu.

6. Connect the HDD cable and

power cable.