diybook KG Garden Gate Closer GTS 120 마운팅
{카테고리_이름} diybook KG Garden Gate Closer GTS 120에 대한 마운팅을 온라인으로 검색하거나 PDF를 다운로드하세요. diybook KG Garden Gate Closer GTS 120 9 페이지. Garden door-closer
diybook KG Garden Gate Closer GTS 120에 대해서도 마찬가지입니다: 설치 지침 (7 페이지), 조립 지침 매뉴얼 (7 페이지)
페이지 인쇄
gardengatecloser.com
a diybook KG brand
Garden Gate Closer GTS 120/170
Mounting example type 2
Wall mounting on gates with side located door hinges
I. Check material and tool list
Your garden gate closer is delivered already assembled. Your product also includes two aluminium brackets with different
side lengths, 4 tapping screws and 2 cap nuts.
WARNING:
The garden gate closer is preloaded! The preloading safety should not be removed before insertion! Due
to preloading the threaded rods of the gate closer are skewed. They will adjust during assembly.
1 garden gate closer GTS 120/170
1 aluminium bracket (bracket 1): 60, 80 or 100 mm
1 aluminium bracket (bracket 2): 30 mm
2 cap nuts M6
4 tapping screws 4,8 x 19 mm
You will need a cordless screwdriver with a 4.2 mm metal drill and a cross slot (Phillips) screwdriver (PH2) for
installation. Furthermore, you need a spirit level, measuring tape, pen and two no.10 fork wrenches as well as an
impact drill, and suitable dowels and screws for your type of masonry.
diybook KG
Korneuburger Strasse 68-70/2
AT-2102 Bisamberg, AUSTRIA
UID-Nr: ATU67654415, DE313733795
FB-Nr: FN 387443 w
telephone: +43 2262 712 51
fax: +43 2262 712 51-77
email: [email protected]
website: https://gardengatecloser.com
page 1